Description

Product Info

Model: C1800FDi

DSP 2 x 950 w power amplifier for fixed install applications

Dynacord’s C Series Two-channel power amplifiers for fixed install

Dynacord’s C Series power amplifiers are designed for permanent installation applications, to provide background or live music in venue including bars, churches, restaurants, sports facilities, and performing arts centers.

C Series power amplifiers also feature an exciting new industrial design. Equipped with an extremely robust power supply and a powerful, linear amp design, flawless operation is guaranteed – even in the most demanding environments. A sophisticated protection circuitry ensures safe, reliable operation under all conditions. Four different models per series are available, with a total output power ranging from 1300 W to 3600 W at 4 ohms.

All models are also suitable for direct drive applications with 70V and/or 100V speaker lines, providing high flexibility for a variety of install scenarios. In addition, the amplifiers feature Euroblock connectors for convenient wiring, remote power-on delay, and GPIOs to interface with third-party controls. The efficient standby power mode reduces running costs and power consumption by up to 90%, leading to a very low total cost of ownership.

Like all Dynacord amplifiers, the C Series also offers high quality components and truly professional processing power and performance characteristics. Their engineering and applied technologies enable exceptional sound quality with plenty of headroom. SONICUE Sound System Software supports C Series, elevating them to the top league of professional amplifiers. The feature-rich onboard DSP gets a boost under SONICUE with 10 band PEQs and a dedicated array processing section. C Series are also equipped with FIR drive, a premium feature you find usually only with tour grade amplifiers, yielding a level of performance unheard of at this price point.

Features

  • SONICUE provides enhanced DSP functionality to 10-band PEQs and a dedicated array processing section
  • Rock solid amplifier technology engineered in Germany
  • Extremely powerful, proven audio performance
  • Engineered for constant stability at 2 ohms
  • Low and high impedance outputs and remote GPIO control
  • Highly efficient standby power mode reduces running costs and power consumption up to 90%.
  • Sophisticated protection circuitry always protects the amplifiers and connected loudspeakers
  • High-performance, bulletproof voltage handling
  • Advanced FIR drive to optimize original factory loudspeaker settings yielding a level of unparalleled performance

Specifications

ModelsC1800FDi
Maximum Output Power, Single Channel2Ω=1600W; 2.6Ω= 1300W;
4Ω= 950W 8Ω= 480W
Maximum Output Power, Dual ChannelLoad Impedance= 2Ω=1400W; 2.6Ω=1200W;
4Ω=850W; 8Ω=450W; High Impedance= 70V
Operation=2x 2500W (-1.5 dB);
Maximum Output Power, BridgedLoad Impedance= 4Ω=2800W; 8Ω=1700W;
100V Operation=1x 1250W
Maximum RMS Voltage Swing,
THD = 1%, 1kHz
65.1V
Voltage Gain ref.1kHz32.0dB
IMD-SMPTE, 60 Hz, 7 kHz< 0.1%
DIM 30< 0.05%
Maximum Input Level+21 dBu
Crosstalk< -80dB
Frequency Response10 Hz to 21 kHz (±1 dB)
Input Impedance, active balanced20kΩ
Signal-to-Noise Ratio (A-weighted)>105dB
Output Noise , A-weighted< -68dBu
Output Stage TopologyClass AB
Power Requirement240 V, 230 V, 120 V or 100 V; 50 Hz to 60 Hz (factory configured)
Power Consumption700 W
ProtectionAudio limiters, high temperature, DC, HF, Back-EMF, Peak current limiters, Inrush current limiters, Turn on delay
CoolingFront-to-rear, 3-stage-fans
Safety ClassI
Height x Width x Depth3.46" (88mm) x 19.02" (483mm) x 18.2" (462.4mm)
Weight Net33.51lbs (15.2kg)
Signal ProcessingFIR filters, audio limiters, output and array** delay, 10-band** user PEQ, 5-band array PEQ** per channel, load impedance
Operating Temperature Range+5°C to +40°C (40°F to +105°F)
Remote controlSONICUE sound system software (requires firmware 2.0)
High Impedance Operation70 V (dual channel), 100 V (bridged)
Remote Power ON/GPIOPower remote via switch, delay time selectable Floating relay contacts (show protect mode)
Inputs for preset selection
Direct Drive Load CapabilityDual Channel 70V Operation: 2 x 1250 W (-1.5 dB) Dual Channel 100V Operation: Not available Bridge Mode 70V Operation: Not recommended Bridge Mode 100V Operation: 2 x 1250 W (-1.5 dB)
Total Harmonic Distortion< 0.05%

Downloads

Product Datasheet: PowerAmplifer-Cseries_AVMedia.pdf